DUST MEASUREMENT

Sensor / Meter / Control Element / IOT Device

Filter monitoring

A qualitative dust measurement, for example by triboelectric filter monitoring, includes both the monitoring of the clean gas dust content after dust collectors as well as the evaluation of the status of the exhaust gas cleaning systems.
The signal generation is based on the triboelectric measuring principle. In other words the charge exchange between the probe and the streaming as well as the bouncing dust particles is carried out.

Filter Monitor PFM 20 F

• suitability tested EN 15267, QAL1 certified
• continuous, tribo-electric in-situ measurement
• qualitative monitoring of filtering dust precipitators
• compact filter monitor with integrated operating element (connection for separate display/operating unit, display/operating unit optional)
• different configurations for power supply

DUST CONCENTRATION

Dust concentration measuring device PFM 20

• suitability tested EN 15267; QAL1 and MCERTS certified
• tribo-electric in-situ dust monitor certified by TUV according to EN 15859:2010
• lowest certificated range 0 - 7.5 mg/m³ dust, max. measuring range 0...250 mg/m³ dust (special range 0...1,000 mg/m³ dust on request)
• for installations requiring a permit (13th BImSchV, 17th BImSchV, 30th BImSchV, 44th BImSchV, TA Luft) as well as at installations according to the 27th BImSchV
• automatic zero and reference point check

Downloads : Product information [PDF]